Jenway 7315 Manual Italian - Manual (Page 23)

23
The user ID function can be accessed through the
instrument settings menu by pressing the key adjacent
to the
user ID icon. Use the keys at the bottom of the
screen to select the digit to be changed. Use the keys
adjacent to the
arrow icons to increase or decrease the
number. Once the preferred user ID has been set press
the key adjacent to the
tick icon to save and return to the
instrument settings menu.
4.8 SCReen ContRASt
The screen contrast function enables the brightness of
the screen to be set. In the instrument settings menu
press the key adjacent to the
screen contrast icon. Use
the keys below the arrow icons to increase or decrease
the screen contrast. Once the required contrast level has
been reached press the key adjacent to the
tick icon to
save and return to the instrument settings menu.
4.9 LAMP SAVe
This function is only available on the 7310 visible spectrophotometer which uses a tungsten halogen
lamp.
The lamp save function enables the time in minutes to
be set after which the lamp will be turned off following
a period of no lamp activity, i.e. no readings have
been performed. This function is accessed through the
instrument settings menu by pressing the key adjacent to
the
lamp save icon.
When this menu is first accessed the lamp save is turned
off. To activate the lamp save function press the key
below the
lamp save icon. To deactivate the lamp save
function press the key below the lamp save icon.
The default minimum time is set to 30 minutes. Select
the digit to be changed using the keys at the bottom of
the screen. Use the keys adjacent to the
arrow icons to
increase or decrease the number. Once the required time
in minutes has been set press the key adjacent to the
tick
icon to save and return to the instrument settings menu.
0 0 1
0 3 0