In-Situ smarTROLL Multiparameter Handheld Operators Manual - Manual (Page 27)

27
8. To locate your site with Maps or GPS, tap the GPS button and your current location
is automatically associated with the site. You can also enter GPS coordinates, or
tap and hold on the map to select a location.
Location Services must be turned on for an accurate location to
display on the map. See Settings > Location and Security.
9. Tap the Save button.
10. Tap the Set button next to the site you created. Now you are ready to record data
associated with the selected site.
Select a Site
After a site has been created, you can select it to record data that will be associated
with that site.
1. From the Live Readings screen, tap the Sites button.
2. Locate the site with which you want to associate your data.
3. Tap the Set button. The site will appear on the Live Readings screen and recorded
data will be associated with the selected site.
Edit a Site
1. Tap the Sites button.
2. Locate the site you intend to edit.
3. Tap the circle next to the Select button for the site.
4. Tap the View button, and make changes to the site information.
5. Tap the Save button.