In-Situ smarTROLL Multiparameter Handheld Operators Manual - Manual (Page 20)

20
iSitu Overview
About the iSitu App
The iSitu App is the user interface and control application for In-Situ Inc. handheld
water quality instruments. You can use iSitu on the Apple iPod Touch, and iPhone for
up to five devices per purchased license.
iSitu allows you to accomplish the following tasks.
l
View live readings that update every 10 seconds.
l
Change parameters and units.
l
Record data.
l
Email data in spreadsheet format.
l
Transfer data from mobile device to a computer.
l
Organize data by Site location.
l
Calibrate Sensors and View Reports
l
Conduct Low-Flow Pump Testing (Additional purchase is required.)
Estimated iPod Battery Life
The table below shows the estimated battery life for the iPod. The values are
dependent on the number of readings taken and the brightness setting on the display.
To change brightness settings, see Settings > Brightness & Wallpaper on the iPod.
*Values provided assume location services and WiFi enabled. Disabling these features
can provide an additional 0.5 to 1 hour of life.
**Default
Connect the Instrument to the iSitu App
1. Make sure that the cable is connected to the instrument and the battery pack.
2. Press the power button on the battery pack.
3. On the mobile device, tap Settings.