In-Situ Virtual HERMIT Tutorial - Manual (Page 30)

30 Communications
After the log configuration has been successfully programmed, the log status
on the tree will update and the log summary will be shown in the Virtual
HERMIT summary screen. This example uses the “Remind Me Later” level
reference value.
In this example, the Level Reference was not set in the Log Wizard. The
buttons to start the log are disabled and will remain that way until all of the
Level TROLL instruments have their level reference set or their
communication session is dropped (they are disconnected and deployed). If
the user operates the observation wells in disconnected mode, they can now
deploy the instruments in the observation wells and configure their level
reference using a RuggedReader handheld PC and Win-Situ Mobile.
Updated log status
Log summary
Level reminder
Set pump well to get drawdown
Set pump well to get drawdown