In-Situ Virtual HERMIT Tutorial - Manual (Page 10)

10 Getting Started
All the Pump Test log files are downloaded to the Win-Situ 5 working
directory’s “Site Data” directory—just like in Win-Situ 5. Also note:
• Delete—Be careful! If you “Delete” a Pump Test, the Pump Test
configuration and the data logs associated with it are also deleted
from your hard drive.
• Discover—If you install the Virtual HERMIT software on a computer other
than the one used to create the Pump Test, you can discover the Pump
Test with this button. The Pump Test information can be located from
existing log files on the hard drive or by connecting to the Level TROLLs
in the field and downloading their Pump Test data logs.
2.1 MAKING THE PHYSICAL CONNECTIONS
Note: If you have trouble
removing the port bulkheads,
stick a screwdriver through
the bulkhead for added
torque. Connect the Level TROLL 700 instruments to the side ports on the Rugged
TROLL Net Hub using the RuggedCable. Connect the single top port on the
Rugged TROLL Net Hub to the laptop with the USB TROLL Com in the kit.
2.2 CREATING A NEW PUMP TEST
From the main window shown on page 9, click the “Create New” button. This
will create a new Pump Test and open the empty configuration shown below:
Click the “Edit” button next to name the pump test. In the example below, the
pump test is named “Ground Hog Meadows”.