Ampro Corporation Single Board Computer 700 - Manual (Page 75)

Chapter 4 BIOS Setup
ReadyBoard 700 Reference Manual 69
♦ Assign DMA 5 – [Disabled] or [Enabled]
• If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
• If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦ Assign DMA 6 – [Disabled] or [Enabled]
• If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
• If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦ Assign DMA 7 – [Disabled] or [Enabled]
• If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
• If another device in the system is using this DMA channel, then this field should be set to
[Disabled].