GW Instek GDM-8261A Remote Viewer(DMM-Viewer) Guide - Manual (Page 28)

GDM-8261(A) Remote Viewer Guide
28
8. Run a scan After all the settings have been configured a scan
can be started.
Click SCAN to scan all the active
channels.
Click STEP to scan each active channel
one at a time.
The data field below the each channel will display
the scan results after each scan.
10. Stop Scanning Press STOP to stop scanning during a
scan.
11. Save settings All the channel, scan and count settings can be
saved and restored for later use.
1. Click the ScanBox
Setting button at the
top of the screen.
2. Select Save ScanBox
Status(S).
3. A pop-up window will appear. Enter a filename for
the ScanBox Status and click OK.
4. The filename will be saved as a *.ini file.