GW Instek GDM-8261A Remote Viewer(DMM-Viewer) Guide - Manual (Page 26)

GDM-8261(A) Remote Viewer Guide
26
4. Chanel
selection
configuration 1. Check the ON:
checkbox above a
channel to activate that
channel in the scan
box.
Alternatively the click
on the On All Open
button to check all the
scanner channels.
CH1
checkbox
Click to
check all
channels
2. To unselect a channel, uncheck the
checkbox or click the On All Clear
button
5. Channel mode
configuration 1. For each activated
channel, select a mode
from the MODE:
drop down list.
Channel 1~16 Mode: ACV, DCV, 2W, 4W,
DIODE, CONTINU, Hz,
P
Channel 17, 18 Mode: ACI, DCI
6. Channel range
configuration 1. For each activated
channel, select a range
from the Range: drop
down list.
Alternatively the Auto:
check box can be
checked to select Auto
Range for the channel.
To select Auto Range
for all channels, click
Auto All Open.
Range: selection
Click to
check all
channels
Auto Range
checkbox