GW Instek GDM-8261A Remote Viewer(DMM-Viewer) Guide - Manual (Page 27)

SCANNER FUNCTION
27
2. To unselect Auto Range, uncheck the
checkbox or click the Auto All Clear
button
7. Scan configuration
Scan count Set the scan count
from the Scan Box
Setting area.
Scan delay Sets the Scan Delay
Time between the first
and second active
channel of each
successive scan loop
after the initial scan
loop in Scan Mode or
between each channel
in Step Mode.
System delay Set the System Delay
Time between each
channel in Scan Mode.
System Delay Time is
not used in Step Mode.
Continuous
scanning Check on the
Continuous option
for continuous
scanning.
Illustration of Scan Mode
Illustration of Step Mode