GW Instek LCR-914 - Manual (Page 3)

LCR-914/915/916 User Manual
1
Read First
Safety Information
Understand and follow the operating instructions carefully. Use
the meter only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.

 WARNING
Identifies hazardous conditions and actions that could cause
BODILY HARM or DEATH.

CAUTION
Identifies conditions and actions that could DAMAGE the meter
or equipment under test.
 WARNING
˙ When using test leads or probes, keep your fingers behind the
finger guards.
˙ Remove test leads from the Meter before opening the battery
door or the Meter case.
˙ Use the Meter only as specified in this manual or the
protection by the Meter might be impaired.
˙ Always use the correct terminals, switch positions, and ranges
for measurements.
˙ Do not apply more than the rated voltage, as marked on
Meter, between terminals or between any terminal and
earth ground.
˙ Use caution with voltages above 30 Vac rms, 42 Vac peak, or
60 Vdc. These voltages pose a shock hazard.
˙ To avoid false readings that can lead to electric shock and
injury, replace the battery when the low battery indicator
appears.
˙ Discharge all high-voltage capacitors before testing.
˙ Do not use the Meter around explosive gas or vapor.
˙ To reduce the risk of fire or electric shock do not expose this
product to rain or moisture.
 Warning
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
Safety sheet
. . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
. . . . . . . . .