GW Instek AFG-100/200 Series Quick Start Guide - Manual (Page 8)

Accessing the Arbitrary Function Generator
Like all options, the AFG-125/225 options can be
accessed with the Option key.
1. Press the
O
key and select AFG.
The AFG-125/225 is now ready to be used.
Basic Waveform Selection
The AFG-125/225 options have five selectable basic
waveforms.
1. Select the output channel by pressing Signal 1
Setup or Signal 2 Setup.
2. Press Waveform Mode and select a waveform type
from the side menu.
Sine, Square, Pulse, Ramp, Noise
3. As appropriate, configure the frequency,
amplitude, offset and duty cycle/symmetry from
the side menu after a basic waveform is selected.
4. Press Go Back from the bottom menu to return to
first level of the AFG menu.