GW Instek AFG-100/200 Series Quick Start Guide - Manual (Page 12)

5. To toggle the load impedance between 50Ω and
High Z, press Load.
6. For basic waveforms, press Phase to set the output
phase.
7. On dual channel models, both output channels
can be phase-synchronized by pressing the
S_Phase soft-key.
State Display
The State Display function gives an overview of the
arbitrary function generator settings for both channels.
1. Press State Disp to toggle the State Display on.
The State Display screen will appear in the center
of the display.
State Display Screen Overview
Signal 2
function
Signal 2
settings
Signal 2
output state
Signal 1
function
Signal 1
settings
Signal 1
output state