Edwards Signaling 7007B-N5 - Manual (Page 2)

2 / 2 P/N P-047550-1871 • REV 03 • REB 12FEB13
Wiring
See Figure 2 for wiring connections.
Figure 2: Wiring connections
Maintenance
WARNING: Electrocution hazard. To reduce the risk of shock,
do not remove lens or tamper with unit when the circuit is
energized. Disconnect power and allow five (5) minutes for
stored energy to dissipate before starting work or disassembly.
High energy could be stored in the strobe circuit once it is
energized.
Perform regularly scheduled testing at least twice a year or
more often as dictated by local authorities having jurisdiction.
Specifications
Operating voltage 120V 60 Hz
Alarm current 115 mA
Regulatory information
Manufacturer Edwards, A Division of UTC Fire & Security
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
North American
standards UL 864
Contact information
For contact information, see www.edwardssignaling.com.