Edwards Signaling 105XBRM - Manual (Page 2)

P/N 3101571 ISSUE 3
Figure 2. Securing the Beacon to the Mounting
Attachment
Figure 3. Wiring the 105XBR Series Beacons
Figure 1. Mounting Cat. No. 105BM Mounting Bracket
105-LC Lens
(4) Countersunk screws
to mount lens to 105BM
(supplied)
Gasket
Adhesive backed
gasket
105BM Mounting
Bracket
(4) Screws to mount
105BM to 105BX
(supplied)
Adhesive backed
gasket
(2) Screws to mount
105BX to the
mounting surface
Mounting
Surface
105BX Outlet
Box Attachment
8. Ensuring that the light source is in place, screw the lens
back on the base.
9. Apply power and verify operability.
The lens should be periodically cleaned using a mild deter-
gent and water and a soft, clean, lint-free cloth.
To prevent electrical shock, before starting
work on units disconnect power and, wait 5
minutes for stored energy to dissipate.
WARNING
Maintenance
105-L Series
Lens
105XBR Base
Wire nuts
(not supplied)
DC units; Red Positive (+),
AC units; Black Hot
18” Wire Leads
DC units; Black Negative (-),
AC units; White Neutral
Power Source
Wires
LED Light Source
105-L Series Lens
Beacon Base
Gasket
Adhesive backed
gasket
105PM Pipe Mount
Attachment
3/4" (19 mm) conduit
nipple
OFF
OFF
ON
ON
1
2
Dipswitch
Location