Edwards Signaling 102 Light Source - Manual (Page 2)

2 / 2 P/N 3100701 • REV 3 • ISS 09AUG10
Cleaning
The lens surfaces should be periodically dusted and cleaned
with a dry soft clean cloth to maintain optimum light visibility. If
necessary, the outside of the lens may be cleaned with water
and a mild detergent on a well rung-out, soft, clean cloth.
Figure 1: Assembling the stackable beacon lighting system
Specifications
Voltage 24 VDC (-G1) 120 VAC (-N5)
Current
Light Modules
102LS-SINH
102LS-SIN
102LS-FINH
102LS-FIN
102LS-ST
102LS-SLED
102LS-FLED
0.32 A
0.32 A
0.32 A
0.32 A
0.30 A
0.062 A
0.062 A
0.11 A
0.08 A
0.11 A
0.08 A
0.30 A
0.022 A
0.022 A
Replacement Lamp
102LS-SINH
102LS-SIN
102LS-FINH
102LS-FIN
50LMP-9WH**
Ind. Trade 303
50LMP-9WH**
Ind. Trade 303
50LMP-12WH
50LMP-10W
50LMP-12WH
50LMP-10W
*Currents shown are for a stackable indicator with 5 light modules.
**A non-halogen lamp, Ind. Trade 303, may be used in place of the
halogen lamp.
Table 1: Lamp Life (Hours)
Light Source Calculated* Projected**
102LS-SINH-G1 12,000 --
102LS-SINH-N5 20,000 --
102LS-SIN-G1 10,000 --
102LS-SIN-N5 2,500 --
102LS-FINH-G1 12,000 15,000
102LS-FINH-N5 20,000 25,000
102LS-FIN-G1 10,000 12,500
102LS-FIN-N5 2,500 3,000
102LS-ST-G1
102LS-ST-N5
3,000*** --
102LS-SLED
102LS-FLED
100,000 --
*At nominal operating voltage.
**Projected lamp life based on manufacturer’s calculated lamp life @
65 fpm and 50% duty cycle.
***Strobe tube life @ operating power to 75% efficiency.
Table 2: Part numbers
Catalog Number Description
102LS-SINH-G1
102LS-SINH-N5
Light module, steady-on, 9W halogen
Light module, steady-on, 12W halogen
102LS-SIN-G1
102LS-SIN-N5
Light module, steady-on, 10W incandescent
102LS-FINH-G1
102LS-FINH-N5
Light module, flashing, 9W halogen
Light module, flashing 12W halogen
102LS-FIN-G1
102LS-FIN-N5
Light module, flashing, 10W incandescent
102LS-ST-G1
102LS-ST-N5
Light module, 3 Joule strobe
102LS-SLED**-G1
102LS-SLED**-N5
Light module, steady-on LED
102LS-FLED**-G1
102LS-FLED**-N5
Light module, flashing LED
102MP-4
102MP-10
102MP-15
Optional Extension Pipe, 4 in.
Optional Extension Pipe, 10 in.
Optional Extension Pipe, 15 in.
*Signifies lens module color (A – amber/orange, B – blue, C – clear, G
– green, R – red, Y – yellow)
**Signifies lens and LED module color (A – amber/orange, B – blue, G
– green, R – red). NOTE: LED light sources must be used with the
corresponding color lens module (e.g., a blue LED light source, 102LS-
SLEDB-G1, must be used with a blue lens, 102LM-B).
Regulatory information
Edwards Signaling Edwards, A Division of UTC Fire & Security
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
Contact information
For contact information, see www.edwardssignaling.com.