Edwards Signaling 383-BT - Manual (Page 4)

©2004 GE Security Industrial. GE Security Industrial reserves the right to change specifications without notice.
I-3706-0204 1033318 Rev
A
www.ge-security.com/industrial
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 800-247-9447
Fax: 503-691-7563
GE Security
Industrial
Ordering Information
PART NUMBER TAMPER PROOF SCREWS & SCREWDRIVER
1953 #6 x 3/4"L Tampruf Roundhead Screw
1954 #8 x 1-1/2"L Tampruf Roundhead Screw
1955 Tampruf ® Screwdriver
1956 Tampruf ® 1/4" Drive Bit for #6 and #8 Screws
PART NUMBER 1 CONTACT 2 SENSE RANGE 3 SENSE RANGE 3 BREAK TERMINAL
CONFIGURATION MINIMUM MAXIMUM RANGE TYPE
381-BT DPST: 1 N.O., 1 N.C. 0.3"(0.8cm) 0.6"(1.5cm) 1.2"(3.0cm) #6 screws
383-BT DPST: 1 N.O., 1 N.C. 0.3"(0.8cm) 0.6"(1.5cm) 1.2"(3.0cm) #6 screws
CIRCUIT CIRCUIT CONTACT LOAD SWITCHING SWITCHING
NUMBER TYPE CONFIGURATION RATING VOLTAGE CURRENT
1 Switch: S1 N.O. 40W/VA 48VAC/VDC 1.0ADC, 0.7AAC
2 Tamper: S2, S3, S4 N.C. 10W/VA 48VAC/VDC 0.3A
Electrical Specifications
Accessories
Warning— Each electrical rating is an individual maximum and cannot be exceeded!
1 The part numbers 381 and 383 are the same in all respects except the conduit connection exits 381 left and 383 right.
2 Configuration with actuator away from the switch
3 Proximity of ferrous materials usually reduces sense range — typically by 50%. The shape and type of material cause a wide diversity of effects.
Testing is required to determine actual sense range for specific applications.