Maintenance, Do no change the factory-applied finish – Edwards Signaling Genesis High Candela Ceiling Horn-Strobe User Manual
Page 3
P/N 3100617 • REV 04 • REB 30JAN13
3 / 4
Table 4: Sound level output (dBA)
Signal
VDC
High db
Low db
Temporal
16
79.8
75.0
24
83.3
78.0
33
85.0
80.9
Steady
16
83.2
79.3
24
85.4
83.0
33
87.8
85.9
UL464: Sound level output at 10 ft. (3.05 m) measured in a
reverberant room.
Table 5: Minimum sound level output per ULC-S525 (dBA, peak)
Signal
Voltage
High db
Low db
Temporal
Reg. 24 VDC
91
89
Reg. 24 VFWR 96
93
Steady
Reg. 24 VDC
93
89
Reg. 24 VFWR 96
93
ULC-S525: Meets or exceeds 85 dBA in an anechoic chamber at 10 ft.
(3.05 m).
Table 6: Audible directional characteristics (horizontal pattern)
Angle (°) [1]
Sound output (dBA) [2]
90 (Ref)
0 (Ref)
75 and 115
−3
70 and 120
−6
[1] Angles are measured from a perpendicular axis; positive angles to
the right.
[2] Peak output at regulated 24 VDC, set for temporal tone.
Table 7: Audible directional characteristics (vertical pattern)
Angle (°) [1]
Sound output (dBA) [2]
90 (Ref)
0 (Ref)
65 and 135
−3
55 and 140
−6
[1] Angles are measured from a perpendicular axis; positive angles are
up.
[2] Peak output at 24 regulated VDC, set for temporal tone.
Figure 6: Light output profile
Maintenance
Do no change the factory-applied finish.
0
50
100
150
200
250
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
295
300
305
310
315
320
325
330
335
340
345 350
355