Edwards Signaling Genesis Ceiling Speaker-Strobe - Manual (Page 2)

2 / 4 P/N 3100614 • REV 07 • REB 30JAN13
7. Replace the cover by positioning the alignment arrows
together and rotating the cover clockwise.
8. Test the unit for proper operation.
Figure 1: Field-configurable switches
1. Candela switch
2. Indicator
3. Wattage switch
Figure 2: Strobe settings
1. JP1: Strobe signal output: Cut to change from 1 flash per second
(public mode) to temporal (private mode)
Note: If the strobe is set to temporal (private mode), this
device is no longer UL 1971 or ULC-S526 Listed or FM
Approved but is UL 1638 Listed.
Figure 3: UL 1971 minimum light output (% of rating vs. angle)
1. Angle
2. Percentage of rated output
Note: Horizontal and vertical outputs have the same pattern
Wiring
Wire per Figure 4.
Figure 4: Wiring Diagram
1. From NAC output
2. To next NAC output
3. Amplifier output voltage matching the voltage ratings of the
speaker (25 or 70 VRMS)
Note: Signal polarity is shown in the alarm condition.
Figure 5: Mounting diagram
1
0
0
9
5
9
0
8
5
8
0
7
5
7
0
6
5
6
0
5
5
5
0
4
5
4
0
3
5
3
0
2
5
2
0
1
5
1
0 5 0 5
1
0
1
5
2
0
2
5
3
0
3
5
4
0
4
5
5
0
5
5
6
0
6
5
7
0
7
5
8
0
8
5
9
0
9
5
1
0
0
0 5 10 15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
-5 -10 -15
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
-85
-90
1
2