Edwards Signaling Genesis Remote Mount Signal Master Module - Manual (Page 3)

P/N 3100299 • REV 07 • REB 30JAN13 3 / 4
Table 2: G1M-RM terminal connections
Terminal Description Terminal Description
1 HORN IN + 5 STROBE IN +
2 HORN IN − 6 STROBE IN −
3 HORN OUT + 7 STROBE OUT +
4 HORN OUT - 8 STROBE OUT -
Specifications
Operating voltage 16 to 33 VDC; 16-33 VFWR
Output rating
3 A max. Actual value limited by
system NAC and power outputs
Synchronization
Flash
Resistance between two
appliances
1/s within 10 mss indefinitely
20 Ω max.
Wire size 12 to 18 AWG (0.75 to 2.50 mm²)
Electrical box
Compatible
Recommended
2-1/2 in. (64 mm) deep single-gang box
4 in. square box 1-1/2 in. (38 mm)
deep with single-gang trim ring
3-3/4 x 2 in. (95 x 51 mm) (H x W) or
greater
Operating environment
Temperature
Relative humidity
32 to 120 °F (0 to 49 °C)
0 to 93% noncondensing
Regulatory information
Manufacturer Edwards, A Division of UTC Fire & Security
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
Year of
manufacture The first two digits of the product serial number
(located on the product identification label) are
the year of manufacture.
UL rating Regulated 24 DC, Regulated 24 FWR [1]
Environmental
class UL: Indoor
North American
standards UL 1971, UL 1638, UL 464, CAN/ULC S525,
CAN/ULC S526
[1] This module was tested to the regulated 24 VDC/FWR operating
voltage limits of 16 V and 33 V. Do not apply 80% and 110% of these
values for system operation.
Contact information
For contact information, see www.edwardsutcfs.com.