Edwards Signaling 300 Series - Manual (Page 4)

GE
Security
U.S.
T 888-378-2329
F 866-503-3996
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852 2907 8108
F 852 2142 5063
Australia
T 61 3 9259 4700
F 61 3 9259 4799
Europe
T 32 2 725 11 20
F 32 2 721 86 13
Latin America
T 305 593 4301
F 305 593 4300
www.gesecurity.com/industrial
©2008 General Electric Company
All Rights Reserved
Electrical Specifications
Applies to all models
Circuit Circuit Contact Load Switching Switching
Number Type Configuration Rating Voltage Current
1 Switch: S1 N.O. 40W/VA 48VAC/VDC 1.0ADC 0.7AAC
2 Tamper: S2, S3, S4 N.C. 3W/VA 48VAC/VDC .25A
2 w/optional LED: D1 N.C. 0.1-1.4W 48VDC (3V drop) 30mA
3 Monitor: S5 N.O. 10W/VA 48VAC/VDC 0.3ADC 0.3AAC
Ordering Information
Part Contact Sense Range Break Lead Length
Number Configuration Maximum Range Nominal
301-BT-SPNHJ6 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 6' (1.8m)
303-BT-SPNHJ6 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 6' (1.8m)
301-BT-SPNHJ12 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 12' (3.6m)
303-BT-SPNHJ12 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 12' (3.6m)
303-BT-SPNHK12 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 12' (3.6m)
301-BT-SPNHJ15 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 15' (6.1m)
301-BT-SPHNJ25 DPST: 1 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 25' (7.5m)
301-B3T-SPNHJ12 TPST: 2 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 12' (3.6m)
301-B3T-SPNHJ25 TPST: 2 N.O., 1 N.C. 0.6" (1.5cm) 1.2" (3.0cm) 25' (7.5m)
Accessories
Part Number Tamper Proof Screws and Screwdriver
1953 #6 x 3/4"L Tampruf Roundhead Screw
1954 #8 x 1-1/2"L Tampruf Roundhead Screw
1955 Tampruf Screwdriver
1956 Tampruf 1/4" Drive Bit for #6 and #8 Screws
Warning - Each electrical rating is an individual maximum and cannot be exceeded!
1. The part numbers 301 and 303 are the same in all respects except the cable exits, 301 left and 303 right.
Not all models are available in 303.
2. Configuration with actuator away from the switch.
3. Proximity of ferrous materials usually reduces sense range- typically by 50%. The shape and type of material
cause a wide diversity of effects. Testing is required to determine actual sense range for specific applications.
Interlock Switches_300 Series.qxd 5/29/08 1:56 PM Page 4