Detcon PI-700 - Manual (Page 58)

Model PI-700
PI-700 Instruction Manual Rev. 2.5 Page 54 of 54
9.4 Model PI-700 Engineering Drawings
1) PI-700 Series Breakaway and Wiring
2) PI-700 Series Dimensional, Mounting, and Wiring - 316 SS condulet
3) PI-700 Series Dimensional, Mounting, and Wiring - Aluminum condulet
9.1 Revision History
Revision Date Changes made Approval
0.0 08/01/2006 Initial Manual release. BM
0.1 04/01/2007 Engineering drawings changed to rev 1. BM
0.2 11/26/2007 Engineering drawings changed to rev 2. BM
1.0 02/29/2008 Yellow wire removed from ITM assembly, changed from DM 700
splashguard adapter to PI-700 Splashguard adapter. BM
1.1 07/14/2008 PID Sensor maintenance procedure modified. BM
1.2 10/01/2009 Added in-line humidifying tube to calibration procedures and Spare
parts, Added PI-700 Splashguard adapter to Spare parts. Updated
engineering drawings to rev 4. BM
1.3 11/16/2009 Addition of Splashguard Adapter with Integral Filter to Maintenance
and Accessories. BM
1.4 12/17/2009 Changed Warranty period from 6 months to 12 months on PID
Sensor cell
BM
1.5 05/12/2010 Updated engineering drawings to rev 5.
Splash Guard adapter with Integral Filter now Standard, (before was
option)
Changed Spare parts list
BM
1.6 12/13/2010 Correction to Note 2 page 15. regarding flow rate BM
1.7 04/25/2011 Added standard EN60079-11 to Section 2.1 and removed Teflon note
in Section 2.5. LU
1.8 7/11/2011 Added Inrush current information to Specifications section.
Added dimensional drawings for Aluminum condulet LU
1.9 04/16/2012 Changed cable recommendation, updated the Modbus Register Map,
company address.
LU
2.0 01/07/2013 Updated ATEX approvals label, updated EN standards that sensor
assembly meets. BM
2.1 04/10/2013 Added max/min AutoSpan chart LU
2.2 11/19/2013 Updated approvals label BM
2.3 12/25/2013 Update Calibration to include Wind Guard BM
2.4 02/12/2014 Clarifications to span cal procedure with target gas LU
2.5 04/15/2014 Update Specification to reflect slower response times BM
Shipping Address: 4055 Technology Forest Blvd., The Woodlands Texas 77381
Mailing Address: P.O. Box 8067, The Woodlands Texas 77387-8067
Phone: 888.367.4286, 281.367.4100 • Fax: 281.292.2860 • www.detcon.com • [email protected]