Detcon PI-700 - Manual (Page 37)

Model PI-700
PI-700 Instruction Manual Rev. 2.5 Page 33 of 54
Figure 21 Removal of Lamp
Cleaning the Lamp
Figure 22 Lamp cleaning
Wearing gloves grab the lamp by the cylindrical glass body and clean the window by rubbing it against the
Polishing Pad. Use a circular motion and try to keep the window surface flat relative to the pad. Five seconds
of rubbing should be enough in most cases. Another indication of cleaning completeness is that about 1/16
th
of
the pad surface is used during the process.
Figure 23 Polishing the Lamp