Aquametrix AM-DFA Doppler Flow Analyzer - Manual (Page 2)

AquaMetrix AM-DFA Doppler Flow Meter
The AM-DFM flow sensor installs without cutting the pipe. It
takes just a few minutes to mount on the outside of any pipe.
Calibration is easy with the built-in, 5-button keypad. Select
your choice of flow units and enter pipe diameter through the
user-friendly calibration menu. Enable password protection
to prevent tampering.
Special Features
• Digital processing system tracks flow signals accurately
and auto-zeroes with signal loss
• Noise suppression circuitry filters “dirty” power and elec-
trical interference from most VFD’s
• Automatically converts between measurement units (e.g.
gallons or liters)
• Calibration data and Totalizer values are stored automati-
cally during power interruptions
• Output “simulation” function simplifies calibration of re-
mote devices (e.g. chart recorders or controllers)
• Self-tunes to Sensor cable length
Benefits of Non-Contacting Flow Measurement
No Contact means no maintenance, no sensor fouling, no
obstruction to flow, no pressure drop, no corrosion and no
pipe cutting or drilling for installation.The analyzer self-tunes
to extended sensor cable lengths up to 500 ft (152 m).
The Aquametrix Guarantee
Quality of Materials and Workmanship - Aquametrix
analyzers are warranted against defects in materials and
workmanship for a period of one year from date of purchase
Refer to our limited warranty included with each product.
Model DFM-5.0 Non-Contacting Doppler Flow Monitor
www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)
Monitors, Displays, Totalizes and Controls from Outside a Pipe