Aquametrix P/R60 Differential pH/ORP Sensors User Manual - Manual (Page 14)

P/R60 & P/R65 Page 14
5.3. Customer Service
If a problem has not been resolved with the above procedures, a telephone consultation with your
AquaMetrix representative, or directly with Water Analytics will provide the answer.
Water Analytics
100 School Street
Andover, MA 01810
978-749-9949
[email protected]
5.4. Parts and Accessories
Description Part #
Submersion Mounting Kit for Series –8 Probes STC60L
Submersion Mounting Kit for Series –6 Probes STC60-6
Protective shroud for Series –8 Probes PROTECTOR-3
Protective shroud for Series –6 Probes PROTECTOR-6
Hot/Wet tap Ball Valve Assembly for Series –7 P60-HTC
Union Mounting Tee w/ Adaptor for Series –8 AM-MH538N9A
500 mL pH 7 Buffer Solution A35-14
4L pH 7 Buffer Solution A35-118
500 mL pH 4 Buffer Solution A35-13
4L pH 4 Buffer Solution A35-117
500 mL pH 10 Buffer Solution A35-24
4L pH 10 Buffer Solution A35-119
500 mL 200mV Buffer Solution A35-40
4L 200mV Buffer Solution A35-115
500 mL 600mV Buffer Solution A35-41
4L 600mV Buffer Solution A35-116
Salt bridge kit for Series –4, –6, –7 & –S (Package of 3 salt bridges and cell solutions) C35-17(K)
Salt bridge kit for Series –8 (Package of 3 salt bridges and cell solutions) AM60-9765(K)
Junction box with terminal strip JB-1
50 ft. 5-wire Interconnect cable dressed both ends C42-5P-050
5.5. Probe Return
If you are returning a probe for inspection, enclose description of the problem. Pack the probe
adequately to avoid damage to the glass electrode and ensure that it will not be exposed to
temperatures below –5°C. Water Analytics cannot be responsible for shipping damage nor for
damage due to frozen electrodes. For safety reasons, Water Analytics cannot accept probes which
have not been thoroughly cleaned to remove all process material.