beautypg.com

9100 i – Triton 9100 Installation Manual User Manual

Page 24

background image

24

M

ODEL

9100 I

NSTALLATION

M

ANUAL

3.

Pick up the dispensing mechanism and place it on end as shown in Figure 3 below.

(Note: For better access to connect the cables, you may want to place the dispenser on the cassette
shown in Figure 4).

4.

Refer to Figure 5. Connect the data cable to the DB25 connector (PL6) on the rear of the dispenser
mechanism. Secure the cable to the dispenser by tightening the 2 thumbscrews on the connector.
Insert the Molex power plug into the connector marked PL2. This plug is keyed so that it can only be
inserted in one direction.

Figure 3. Place dispenser on end.

Figure 4. Dispenser on cassette.

Figure 5. Connect power and data cables.

Power cable

Data cable

See also other documents in the category Triton Equipment: