SnowEx PWX-250 - Manual (Page 4)

© Trynex International 2012 (REV A) F50766 4
Introduction
This manual has been designed for your help. It will assist you and instruct you on the proper set-up, installation and use of this spreader.
Refer to the table of contents for an outline of this manual.
We require that you read and understand the contents of this manual completely (especially all safety information) before attempting any
procedure contained herein.
THIS SIGN SHOULD ALERT YOU:
The Society of Automotive Engineers has adopted this
SAFETY ALERT SYMBOL to pinpoint characteristics
that, if NOT carefully followed, can create a safety hazard. When you see this symbol in this manual or on the
machine itself, BE ALERT! Your personal safety and the safety of others is involved.
Defined below are the SAFETY ALERT messages and how they will appear in this manual:
(RED)
Information that, if not carefully followed,
can cause death!
(ORANGE)
Information that, if not carefully followed,
can cause serious personal injury or death!
(YELLOW)
Information that, if not carefully followed,
can cause minor injury or damage to equipment
Ratchet or Impact
1/2 Socket
Drill with Socket Adapter
Dielectric Grease
1/2”-14 NPT Tap
Drill
9/16” Drill Bit
Permanent Marker
Tape Measure
Channellocks
Adjustable Wrench
Tools and
Materials List: 5/16” Nut Runner
Long Screwdriver
1-1/4 Wrench
Needle-Nose Pliers
Wire Cutters
1/2” Nutdriver
7/16” Nutdriver
15/16” Wrench
Adjustable Wrench
3/4” Wrench
3/4” Socket