LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 45)

User Manual of DS-9600/8600/7700/7600 Series NVR
45
3.3 Adjusting Live View Settings
Purpose:
Live View settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
Figure 3. 7 Live View-General
The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for. Outputs include
HDMI (depends on the model), VGA, Main CVBS and Spot Output.
Notes: No CVBS spot out for LTN7732-P8/LTN7616/LTN7632, LTN7600-P series NVR.
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling
auto-switch in Live View.
•
Enable Audio Output: Enables/disables audio output for the selected video output.
•
Event Output: Designates the output to show event video.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. Setting Cameras Order