Checking the network status, 3 checking the network status – LT Security LTN7600 Series NVR (V2.2.3) User Manual
Page 155
User Manual of DS-9600/8600/7700/7600 Series NVR
155
3. Select the backup device from the dropdown list of Device Name, as shown in Figure 9. 27.
Note:
Click
if the connected local backup device cannot be displayed. When it fails to
detect the backup device, please check whether it is compatible with the NVR. You can format the backup
device if the format is incorrect.
Figure 9. 27 Export Network Packet
4. Click
to start exporting.
5. After the exporting is complete, click OK to finish the packet export, as shown in Figure 9.
Figure 9. 28 Packet Export Attention
Note:
Up to 1M data can be exported each time.
9.4.3 Checking the network status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click
on the right bottom of the page.