Managing network hdd, 2 managing network hdd – LT Security LTN7600 Series NVR (V2.2.3) User Manual
Page 161
User Manual of DS-9600/8600/7700/7600 Series NVR
161
10.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD.
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General.
Figure 10. 5 HDD Information Interface
2.
Click the Add button to enter the Add NetHDD interface, as shown in Figure 10. 6.
Figure 10. 6 HDD Information Interface
3.
Add the allocated NetHDD.
4.
Select the type to NAS or IP SAN.
5.
Configure the NAS or IP SAN settings.
•
Add NAS disk:
This manual is related to the following products: