LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 139)

User Manual of DS-9600/8600/7700/7600 Series NVR
139
8.7 Triggering or Clearing Alarm Output
Manually
Purpose:
Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the
dropdown list of dwell time of an alarm output, the alarm can be cleared only by clicking Clear
button in the following interface.
Steps:
Select the alarm output you want to trigger or clear and make related operations.
Menu> Manual> Alarm
Click Trigger/Clear button if you want to trigger or clear an alarm output.
Click Trigger All button if you want to trigger all alarm outputs.
Click Clear All button if you want to clear all alarm output.
Figure 8. 19 Clear or Trigger Alarm Output Manually