Restoring default settings, 5 restoring default settings – LT Security LTN7600 Series NVR (V2.2.3) User Manual
Page 190
User Manual of DS-9600/8600/7700/7600 Series NVR
190
12.5 Restoring Default Settings
Steps:
1.
Enter the Default interface.
Menu > Maintenance > Default
Figure 12. 15 Restore Factory Default
2.
Click the OK button to restore the default settings.
Note:
Except the
network parameters (including IP address, subnet mask, gateway, MTU, NIC working mode,
default route and server port), all other parameters of the device will be restored to factory default settings.
This manual is related to the following products: