LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 4)

User Manual of DS-9600/8600/7700/7600 Series NVR
4
Product Key Features
General
 Connectable to network cameras, network dome and DVS.
 Connectable to the third-party network cameras like AXIS, ONVIF, PANASONIC,
PSIA, SAMSUNG and SANYO.
 PAL/NTSC adaptive video inputs.
 Each channel supports dual-stream.
 Up to 32 network cameras can be connected for LTN7732 and LTN7732-P8 series
NVR, 16 network cameras for LTN7616, and 8 network cameras for LTN7608-P4 and
LTN7608-P8 models. Independent configuration for each channel, including
resolution, frame rate, bit rate, image quality, etc.
 The quality of the input and output record is configurable.
Local Monitoring
 Simultaneous HDMI, VGA and CVBS outputs. (No CVBS output for 7600NI-SE(/N)
and 7600NI-SE/P series NVR.)
 HDMI output and VGA output at up to 1920×1080 resolution.
 Multiple screen display in live view is supported, and the display sequence of channels
is adjustable.
 Live view screen can be switched in group, and manual switch and automatic cycle
live view are also provided, and the interval of automatic cycle can be adjusted.
 Quick setting menu is provided for live view.
 Motion detection, tamper-proof, video exception alert and video loss alert functions.
 Privacy mask.
 Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
 Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
 For LTN7616 series, 2 SATA hard disks and 1 eSATA disks can be connected.
For LTN7732 and LTN7732-P8 series, 4 SATA hard disks and 1 eSATA disk can be
connected.
For LTN7600-P series, up to 2 SATA hard disks can be connected. And up to 8 SATA
hard disks and 1 eSATA disk can be connected for other models. (Each disk with a
maximum of 4TB storage capacity.)
 8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.
 Support eSATA disks for recording or backup. (For LTN7600-P series, this function is
not supported.)
 HDD group management.
 Support HDD standby function.
 HDD property: redundancy, read-only, read/write (R/W).
 HDD quota management; different capacity can be assigned to different channel.
Recording, Capture and Playback
 Holiday recording schedule configuration.
 Normal and event video encoding parameters.