Hired-Hand Evolution Series 3000/3001: Add-On Ventilation Kits - Manual

Directions for Installing Evolution
3000 Add-On Ventilation Kits
Hired-Hand Manufacturing., Inc. • 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4801-5308 rev 09-05 Page 1 of 12
Ventilation Kits
Description
These instructions are for installing Ventilation Kits in the
Evolution 3000 Controller. Three kits are discussed: The
Power Ventilation Kit (Part No. 6450-5101), the Natural
Ventilation Kit (Part No. 6450-5102), the Ventilation
Expansion Kit (Part No. 6450-5104), and the 2-Stage Inlet
Kit (Part No. 6450-5105). The installer will also need the
Evolution Owners Manual (Part No. 4801-5307) for
wiring diagrams external to the Ventilation Kits.
Contents of Ventilation Kits
Those items included in each kit are indicated in the right hand columns with an “X”.
ITEM - DESCRIPTION
HHI Part
Number
Quan.
Power Vent Kit
(6450-5101)
Natural Vent Kit
(6450-5102)
Vent Expan. Kit
(6450-5104)
2-Stage Inlet Kit
(6450-5105)
PCB167 EV Curtain Relay Board 6407-1516 1 X X X X
Conn TBLK 3 pos Magnum 3006-5082 2 X X X
Conn TBLK 3 pos EBY 3006-5077 2 X
Conn TBLK 4 pos EBY 3006-5078 2 X
Inlet Machine SWX Assy. 6407-6017 1 X X X X
NUT Machine 6-32 hx z 1001-1461 4 X X X X
EV I/O Curtain Card Harness 1903-4010 1 X
EV I/O Curtain Nat. Card Harness 1903-4023 1 X
Module Static Pressure 3591-2252 1 X
SCRW 10-32X1/2 PAN SL M/S Z 1004-3056 2 X
HRNS EV Setra 1903-4011 1 X
Owners Manual Vent Add-On 4801-5308 1 X X X X
CTRL tubing 1/8” pvc clr 25’ 6407-0156 1 X
KIT Static Pressure Control 6450-0125 1 X
Vent Expansion Harness 1903-4029 1 X
2-Stage Inlet Harness 1903-4033 1 X X
Tools Required
Screw Driver Small Knife Wrench Set Nut Driver Kit
Drill with Bits Meas. Tape Socket Set 5/16” and ¼” Nut Driver