Hired-Hand Farm Hand Series: Data Shuttle Launch Pad - Manual (Page 7)

Part No. 4801-0165 Rev 7-02 Data Shuttle Launch Pad 5
8.1 Data Shuttle External Functions -- Options
Use this window to select any or
all of the desired options by
clicking on the check boxes. A
separate window is provided for
each of the desired options.
When an option is checked, the
appropriate tab will become
active. The separate windows
that are active can be selected
by clicking on the tabs at the top
of the window.
The Loaded Programs section
will show the names of program
files that have been saved
earlier.
After all new program data has
been entered it is necessary to
return to this window to Launch
the Data Shuttle. Simply click on the Launch Shuttle button.
8.2 Data Shuttle External Functions -- Logging
The following window allows the selection of the two Power Vent controllers or the six
Farm Hand Stage controllers or the Alert Alarm to record temperature data in the Shuttle
from the controller sensors. When new
Farm Hand controllers become available,
they can easily be added to this list.
To select any of the controllers, first
select the First Choose a Controller
Type by clicking the down arrow. The
drop down list will appear. Select the
desired controller by clicking with the
left mouse button. The following
parameters can be set using this
window:
Sensors/Parameters - Allows any or
all of the four temperature sensors to be
selected for recording.
Average - Will record the average of the
inside sensors.
Target - The target temperature of the
Farm Hand controller.
Select All - Will check all of the
Sensors/Parameters.
The Interval, Duration, Enable Multiple Sampling and Wrap Data are set the same as
discussed in Section 7.2.