Hired-Hand Mega-Cool: Square Reservoir - Manual (Page 16)

Part No. 4801-5397 Rev. 5-08 Mega-Cool System – Square Reservoir Page 16
Mega-Cool 10'-120' Straight Span, Center-Mount In-Line Pump System
Center In-Line Pump Kits
(Complete Assembly)
INSTRUCTIONS
1. Assemble Mega-Cool Systems following the procedures in
this manual.
2. Locate reservoir and In-Line Pump in the center of Mega-
Cool System as shown in diagram to the left.
3. Installation complete.
NOTE: Excessive turns/elbows in pipe
will reduce water flow and
stress the pump.
Pump
1" Ball Valve
(1009-0101)
PVC Tee Reducer
1 1/4"x 1 1/4"x 1 ½"
(1021-0134)
PVC Elbow 1 ½"
(1021-0106)
1 ½" to 1 ¼" Reducer
(1021-0134)
In-Line Filter
(1049-0100)
PVC Elbow 1 ½"
(1021-0106)
1 ½" Ball Valve
(1009-0101)
1 ½" Ball Valve
(1021-6016)