Hired-Hand Mega-Cool: Square Reservoir - Manual (Page 13)

Part No. 4801-5397 Rev. 5-08 Mega-Cool System – Square Reservoir Page 13
Install System End Caps
1. Install metal end cap at each end of system.
2. Fit spray line through hole at top of end cap.
3. Install and glue on 1 ½" Ball Valves and reducer
coupling to spray line as shown.
4. Paste label onto end cap as shown.
Front View
Fit end of
spray line
through hole .
End Cap
Side View
Label
End Cap
Glue on Ball Valve and Reducer coupling
after end caps are installed.