HATZ Diesel 4M42 User Manual
Page 82
Overview
Procedure
Step
Activity
1
Release the oil filter with a strap wrench and quickly unscrew
and remove it.
▪ HATZ order no. for strap wrench: 620 307 01.
2
Dispose of the old filter in accordance with local environmental
regulations.
3
Wipe spilled engine oil out of the oil baffle.
4
Lightly oil the sealing lip of the new oil filter.
5
Screw in the oil filter and tighten it by hand.
6
Add engine oil to the max. mark on the dipstick.
▪ For the specification and viscosity, see the chapter 4.3 Engine
▪ The mark of the dipstick indicates whether the engine is
equipped with an oil sump or not (see the chapter 4.1 En-
gine, page 22).
7
Reinsert the dipstick.
8
Check the oil level after a short test run and correct if necessary.
9
Check the oil filter for tightness and retighten by hand if neces-
sary.
Maintenance
2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42
82
Operator's Manual
HATZ