Setting the speed control, Starting the engine – HATZ Diesel 4M42 User Manual
Page 37
7.4
Setting the speed control
Overview
Procedure
Step
Activity
1
Depending on the possibility or requirement, place the
speed control lever in either the "1/2" or "Start" position.
NOTICE
i
A lower speed setting will cause less exhaust smoke when start-
ing.
7.5
Starting the engine
Starting options
The standard equipment of the engine is an electric start mechanism. A
hand starter can be installed as an option.
If possible, separate the engine from the machine being driven by uncou-
pling it. Always switch the machine into idle mode.
2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42
Operation and use
HATZ
Operator's Manual
37