HATZ Diesel 4M42 - Manual (Page 54)

Procedure
Step Activity
1 Switch off the engine and wait several minutes for the engine oil
to collect in the crank housing. The machine must be horizontal.
2 Remove contamination on the engine in the area of the dipstick
(1).
3 Pull out the dipstick and clean it.
4 Reinsert the dipstick.
5 Pull out the dipstick and check the oil level.
6 If the oil level is close to the min. mark, add engine oil to the
max. mark.
7 Reinsert the dipstick.
Operation and use 2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42
54 Operator's Manual HATZ