HATZ Diesel 4M42 - Manual (Page 55)

8 Maintenance
8.1 General maintenance instructions
Safety notes
WARNING
Danger of injury from the failure to follow the operating in-
structions and from performing unauthorized tasks on the
machine.
▪ Follow all instructions.
▪ Do not perform activities that are not authorized. Contact
properly trained personnel if necessary.
NOTICE
Comply with the safety chapter!
Follow the basic safety instructions in the chapter 3 Safety,
page 7.
▪ Maintenance tasks may only be performed by trained personnel.
▪ Accident prevention measures must be in accordance with the local acci-
dent prevention regulations.
▪ Perform setting and maintenance work at the specified intervals.
▪ Replace faulty machine parts as soon as possible.
▪ Always use personal protective equipment.
▪ Only use fully functional tools.
▪ Problems may occur if unsuitable spare parts are installed. We cannot ac-
cept responsibility for damage and secondary damage that result from
this. We therefore recommend the use of Hatz original spare parts.
▪ Closely adhere to the maintenance conditions prescribed in this Operator's
Manual.
▪ Only make changes on the machine in agreement with the manufacturer.
▪ Only perform maintenance while the engine is switched off.
▪ Adhere to legal regulations when handling and disposing of used oil, filters
and cleaning agents.
▪ Protect the starting key against unauthorized access.
▪ For engines with a electric starter: disconnect the negative battery termi-
nal.
▪ After completing maintenance work, check that all tools, bolts, aids and
other objects are removed from the machine and that all safety equipment
has been replaced.
2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42 Maintenance
HATZ Operator's Manual 55