Elitegroup MD100/MD110 (V1.0) Manual - Manual (Page 37)

30
Using BIOS
Frequency/Voltage Control
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Frequency/Voltage Control
Help item
Options
Disabled
Enabled
Manufacturer : Intel
Ratio Actual Value : 12
CPU Over-clocking Func. : Disabled
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Enabled
mnlk
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
Press to return to the main menu setting page.
Manufacturer: Intel
This item displays the information of current manufacturer of the CPU installed in
your computer.
Ratio Actual Value: 12
This item shows the actual ratio of the CPU installed in your system.
CPU Over-clocking Func.
This item decides the CPU over-clocking function installed in your system. If the
over-clocking fails, please turn off the system power. And then, hold the PageUp key
(similar to the Clear CMOS function) and turn on the power, the BIOS will recover
the safe default.
Auto Detect DIMM/PCI Clk
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.