Elitegroup MD100/MD110 (V1.0) Manual - Manual (Page 29)

22
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Date Mon 01/01/2007
SATA 1 Not Detected
SATA 2 Not Detected
Help Item
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
Time 00 : 01 : 05
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date. IDE BusMaster Enabled
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
SATA 1~2 f
This motherboard supports two SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
f
f
mnlk : Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
CMOS SETUP UTILITY -- Copyright (C) 1985-2005, American Megatrends, Inc.
SATA1
Type Auto
LBA/Large Mode
Auto
Block (Multi-Sector Transfer Auto
PIO Mode
Auto
DMA Mode Auto
S.M.A.R.T Auto
32Bit Data Transfer Enabled
Help Item
Select the type
of device connected
to the system.
Device : Hard Disk
Vendor
mnlk : Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
SATA1
: Hitachi HDS721680PLA380
Size : 82.3GB
: Supported
: 16Sectors
: 4
: MultiWord DMA-2
: Ultra DMA-6
: Supported
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
S.M.A.R.T