Elitegroup MD100/MD110 (V1.0) Manual - Manual (Page 33)

26
Using BIOS
DVMT/FIXED Memory
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory. When set to DVMT Mode, the graphics chip
will dynamically allocate system memory as graphics memory, according to system
and graphics requirements.
HPET
This item enables or disables HPET (High Precision Event Timer) support
Onboard SATA Mode
Use this item to select the mode of the Serial ATA.
Onbord AUDIO Function
Use this item to enable or disable the onboard audio controller.
Press to return to the main menu setting page.
Serial Port1 Address
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
Onboard LAN Function
Use this item to enable or disable the onboard LAN function.
Onboard LAN BOOT ROM
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
USB Functions
Use this item to enable or disable the USB function.
Legacy USB Support
Use this item to enable or disable support for legacy USB devices.
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item Onboard SATA Mode Enhanced
Onboard AUDIO Function Enabled
Onboard LAN Function Enabled
Onboard LAN BOOT ROM Disabled
Serial Port1 Address 3F8/IRQ4
USB Functions
Enabled
Legacy USB Support Enabled
Options
Disabled
Compatible
Enhanced
mnlk : Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
Press to return to the main menu setting page.