Elitegroup MD100/MD110 (V1.0) Manual - Manual (Page 32)

25
Using BIOS
Boot Other Device
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second and
Third boot devices.
1st/2nd/3rd Boot Device
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Press to return to the main menu setting page.
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
DVMT Mode Select DVMT Mode
DVMT/FIXED Memory 128MB
HPET Enabled
Help Item
Options
Auto
400 MHz
533 MHz
mnlk : Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
DRAM Frequency
This item enables users to adjust the DRAM frequency. The default setting is auto
and we recommend users leave the setting unchange. Modify it at will may cause the
system to be unstable.
Configure DRAM Timing by SPD
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
DVMT Mode Select
DVMT is Dynamic Video Memory Technology. This item helps you select video
mode.