Elitegroup MD100/MD110 (V1.0) Manual - Manual (Page 31)

24
Using BIOS
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Thermal Management
This item displays CPU’ temperature and enables you to set a safe temperature to
Prescott CPU.
TM Status
This item displays CPU Monitor status.
Limit CPUID MaxVal
Use this item to enable or disable the Max CPU ID value limit.
Intel XD Bit
This item enables or disables the Intel XD Bit technology.
Hyper-Threading Technology
This item is only available when the chipset supports Hyper-Threading and you are
using a Hyper-Threading CPU.
Quick Power on Self Test
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
Thermal Management Enabled
TM Status TM1
Limit CPUID MaxVal Disabled
Intel XD Bit Disabled
Hyper-Threading Technology Enabled
Quick Power on Self Test
Enabled
Boot Up Numlock Status On
APIC Mode Enabled
1st Boot Device Hard Drive
2nd Boot Device CD/DVD
3rd Boot Device Removable Dev.
Boot Other Device Yes
Help Item
For the processor its
CPUID belows 0F41h
mnlk : Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help