Elitegroup MD100/MD110 (V1.0) Manual - Manual (Page 35)

28
Using BIOS
Resume on RTC Alarm
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
mnlk
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
Smart Fan Function Press Enter
Shutdown Temperature Disabled
FAN Speed : 6308 RPM
CPU Temperature : 31°C/87°F
CPU Core : 1.136V
VDIMM : 1.920 V
-=- System Hardware Monitor -=-
f
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
SMART Fan Control Enabled
SMART Fan start PWM value 60
SMART Fan start TEMP. ( ° C ) 30
CPU DeltaT +3
SMART Fan Slope PWM value 3 PWM value/ °C
CPU FAN Full Limit Temp 52°C
Smart Fan Function f
Scroll to this item and press to view the following screen:
Disabled
Enabled
Options
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn
< >
Press to return to the main menu setting page.