Installing the motherboard connecting i/o devices – Elitegroup MD100/MD110 (V1.0) Manual User Manual
Page 23
16
Installing the Motherboard
Connecting I/O Devices
The backplane of the motherboard has the following I/O ports:
LAN Port
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
Use the COM1 port to connect serial devices such as mouse
or fax/modems.
PS2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard
Use the lower PS/2 port to connect a PS/2 keyboard.
VGA1 Port
Connect your monitor to the VGA1 port.
Serial Port
(COM1)
USB Ports
Use the USB ports to connect USB devices.
J1
Connect a DC-in jack to J1.
Use the three audio ports to connect audio devices. The
first jack is for stereo line-in signal. The second jack is for
stereo line-out signal. The third jack is for microphone.
Audio Ports