Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) - Manual (Page 83)

Brocade Virtual ADX Security Guide 71
53-1003250-01
Displaying NAT information
4
nat tcp rev ip status zero Indicates the number of times that an error in NAT translation for TCP reverse
traffic has occurred.
nat tcp rev usr index null Indicates the number of times that a “port unreachable” message was
generated because the Brocade Virtual ADX could not create a user session
for TCP reverse traffic.
send nat unreachable (udp fwd) Indicates the number of times that a “port unreachable” message was
generated for UDP forward traffic.
nat udp fwd no ports avl Indicates the number of times that a “port unreachable” message was
generated because the Brocade Virtual ADX could not get a port from the
port pool for a NAT IP for UD forward traffic.
nat udp fwd status zero Indicates the number of times that an error in NAT translation for UDP
forward traffic has occurred.
nat udp fwd status zero Indicates the number of times that an error in NAT translation for UDP
forward traffic has occurred.
nat udp fwd usr index null Indicates the number of times that a “port unreachable” message was
generated because the Brocade Virtual ADX could not create a user session
for UDP forward traffic.
send nat unreachable (udp rev) Indicates the number of times that a “port unreachable” message was
generated for UDP reverse traffic because the Brocade Virtual ADX could not
get a port from the port pool for a NAT IP.
nat udp rev no port avl Indicates the number of times that a “port unreachable” message was
generated because the Brocade Virtual ADX could not get a port from the
port pool for a NAT IP for UDP reverse traffic.
nat udp rev status zero Indicates the number of times that an error in NAT translation for UDP reverse
traffic has occurred.
nat udp rev ip status zero Indicates the number of times that an error in NAT translation for UDP reverse
traffic has occurred.
nat udp rev usr index null Indicates the number of times that a “port unreachable” message was
generated because the Brocade Virtual ADX could not create a a user session
for UDP reverse traffic.
sw l4 nat corruption Indicates the number of instances of NAT session corruption.
rstp port unavailable Indicates the number of times that a NAT port was not available for RSTP.
RTSP inside alloc same Indicates the number of times that the used port and proposed client port
were the same for RSTP.
RTSP reply port not same Indicates the number of times that the used port and proposed client port
were not the same for RTSP.
Wrong port range Indicates the number of times that the NAT port used a port in the wrong port
range. For example, where a NAT port used a port from the normal port pool
range for RTSP.
Port Pool Parameters
[x] The variable represented by "x" represents the index of the IP address in the
IP NAT pool. For example, [0] refers to the first IP address in the IP pool
(216:220:209:230). [1] refers to the second IP address in this IP pool
(216:220:209:231).
TABLE 4 Display fields for show ip nat statistics (Continued)
This field... Displays...