Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) - Manual (Page 107)

Brocade Virtual ADX Security Guide 95
53-1003250-01
DDoS protection
5
Displaying security filter statistics
You can display security filter statistics as shown.
The counters shown for the show security filter-statistics command display the DDoS attack types
and the number of packets that have been counted, logged or dropped for each type.
Syntax: show security filter-statistics
Address-sweep and port-scan logging
The Brocade Virtual ADX provides a log message for address-sweep and port-scan. When the
Brocade Virtual ADX detects either of these attacks, the SSM CPU will send a message to the MP
indicating the particular IP will be held down for the specified time interval.
Log example:
Security: Address-sweep attack detected!Holdown 10.10.1.101 for 2 min
Virtual ADX#show security filter-statistics
Filter |Type |Log Cnt |Drop Cnt
dos-filter |icmp-type |0 |0
Cumulative Statistics
attack-type = log-count, drop-count
ip-options = 0, 0
icmp-type = 0, 0
address-sweep = 0, 0
port-scan = 0, 0
generic = 0, 0
filter-dns = 0, 0
Attack-type = Attack-count
ipv6-ext-header = 1201
icmpv6-type-All = 321
icmpv6-type-NS = 221
icmpv6-type -NA = 60
icmpv6-type-RS = 24
icmpv6-type-RA = 16
large-icmp = 0
unknown-ip-proto = 0
xmas-tree = 0
tcp-no-flags = 0
syn-fragments = 0
syn-and-fin-set = 0
deny-all-fragments = 0
fin-with-no-ack = 0
icmp-fragment = 0
land-attack = 0
ping-of-death = 0