Configuration examples for ssl termination mode, Configuring ssl termination mode, N, see – Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) User Manual
Page 146: Configuration examples for ssl termination, Mode
134
Brocade Virtual ADX Security Guide
53-1003250-01
Configuration examples for SSL Termination Mode
6
•
An SSL port is defined on the virtual server vip2.
•
SSL Termination is enabled and the SSL profile ipv6_profile is specified on the virtual server
vip2.
•
A bind is configured between SSL on virtual server vip2 and HTTP on real server rs2.
Virtual ADX(config)#server real rs2 2001:db8:2000::1
Virtual ADX(config-rs-rs2)#port http
Virtual ADX(config-rs-rs2)#exit
Virtual ADX(config)#server virtual-name-or-ip vip2 2001:db8:2000::10
Virtual ADX(config-vs-vip2)#port ssl
Virtual ADX(config-vs-vip2)#port ssl ssl-terminate ipv6_profile
Virtual ADX(config-vs-vip2)#bind ssl rs2 http
Syntax: [no] port ssl ssl-terminate ssl-profile-name
The ssl-profile-name variable specifies the name of the SSL profile that you want to bind to the SSL
port, termination mode configuration.
Configuration examples for SSL Termination Mode
This section describes the procedures required to perform the configurations described in
on page 99 a. As shown in the examples there, SSL Termination mode provides
for an SSL connection between clients to the Brocade Virtual ADX.
Configuring SSL Termination Mode
To configure SSL in the termination mode, perform the following tasks in sequence:
1. Generate or obtain an RSA key pair and copy it to the Brocade Virtual ADX
2. Obtain a digital certificate and copy it to the Brocade Virtual ADX
3. Create an SSL profile as described in
“Allowing self-signed certificates”
4. Within the SSL profile specify a keypair file as described in
5. Within the SSL profile specify a digital certificate file as described in
6. Within the SSL profile select a Cipher Suite as described in
page 126. This is optional.
7. Configure real and virtual servers as described in
“Configuring real and virtual servers for SSL
Generate an RSA key pair example
Virtual ADX#ssl genrsa rsakey-file 1024 mypassword
Generate a Self-signed Digital Certificate example
Virtual ADX#ssl gencert certkey rsakey-file signkey rsakey-file mypassword
mycert
You are about to be asked to enter information that will be incorporated into
your certificate request. What you are about to enter is what is called a
Distinguished Name or a DN.
Country name (2 letter code) [US] US